COPEH - Section 1 : Refuse Storage and Collection
1.1 Objective 1.2 Refuse Output 1.3 Refuse Chute 1.4 Refuse Chute Chamber 1.5 Refuse Room	1.6 Refuse Bin Point and Refuse Bin Centre 1.7 Pneumatic Waste Conveyance System (PWCS) 1.8 Mandatory Waste Reporting Scheme 1.9 Location of Grease Trap 1.10 On-Site Food Waste Treatment System
When to apply: Applicants should provide the above information (either in 2D, 3D or supporting documents) and should be concluded by Construction Gateway (G2). Equipment can be modelled as placeholders and supplier details can be provided in a separate document.	Who to submit: QP appointed should submit the above information and keep other relevant QPs in the loop. The same QP should follow through the submissions for all gateways.

COPEH - Section 2 : Public Toilet
2.1 Objective 2.2 Definition of Public Toilet 2.3 General Design Criteria	2.4 Sanitary and Water Fittings Required in Public Toilet 2.5 Amenities to be Provided 2.6 Ventilation
When to apply: Applicants should provide the above information (either in 2D, 3D or supporting documents) and should be concluded by Construction Gateway (G2).	Who to submit: QP appointed should submit the above information and keep other relevant QPs in the loop. The same QP should follow through the submissions for all gateways.

COPEH - Section 3 : Ventilation, Ducting and Kitchen Exhaust Systems for Food Shop

3.1 Objective

3.2 Design Requirements

3.3 Operations Requirements

3.4 Other Requirements and Guidelines

When to apply:

Applicants should provide the above information (either in 2D, 3D or supporting documents) and should be concluded by Construction Gateway (G2). Terminals and façade louvres are to be modelled. Ducting can be in 2D or 3D.

Who to submit:

QP appointed should submit the above information and keep other relevant QPs in the loop.
The same QP should follow through the submissions for all gateways.

COPEH - Section 4 : Cooling Tower (when it is provided)

4.1 Objective

4.2 Design Requirements

When to apply:

Applicants should provide the above information (either in 2D, 3D or supporting documents) and should be concluded by Construction Gateway (G2)

Who to submit:

QP appointed should submit the above information and keep other relevant QPs in the loop.
The same QP should follow through the submissions for all gateways.

COPEH - Section 5 : Aquatic Facility
5.1 Objective 5.2 Minimum Design Criteria
When to apply: Applicants should provide the above information (either in 2D, 3D or supporting documents) and should be concluded by Construction Gateway (G2). Balancing Tank is to be modelled.	Who to submit: QP appointed should submit the above information and keep other relevant QPs in the loop. The same QP should follow through the submissions for all gateways.

COPEH - Section 6 : Storage and Collection System for Recyclables at Strata-Titled properties with Residential Units
6.1 Objective 6.2 Recyclables Output	6.3 Designated Recycling Points for Recycling Receptacles 6.4 Recyclables Chute System
When to apply: Applicants should provide the above information (either in 2D, 3D or supporting documents) and should be concluded by Construction Gateway (G2).	Who to submit: QP appointed should submit the above information and keep other relevant QPs in the loop. The same QP should follow through the submissions for all gateways

COPEH - Section 7: Anti-Mosquito Breeding
7.1 Objective 7.2 Roof Gutter	7.3 Air-Conditioning Tray 7.4 Floor Trap
When to apply: Applicants should provide the above information (either in 2D, 3D or supporting documents) and should be concluded by Construction Gateway (G2).	Who to submit: QP appointed should submit the above information and keep other relevant QPs in the loop. The same QP should follow through the submissions for all gateways.

G2 Construction Gateway